基于轴角转换器的一种高精度动态测角系统

设计了一种基于轴角转换器AD2S80的高精度感应同步器动态测角系统，分析了测角误差产生原因，提出了误差调整和补偿措施。通过实例数据表明：用谐波分析的方法对测角误差进行了调整与补偿，从而可大幅度提高测角精度。     

前体非对称涡高风速烟雾显示技术

通过在细长旋成体模型机身的不同位置设置出烟孔，使用新型发烟装置对模型注入雾化油 滴，采用激光片光法在常规风洞中高风速(60m/s)条件下得到清晰、完整而稳定的截面涡 结构图像. 并通过同状态标定法和等比例网格法发展了简易涡位定量测量技术，为前体非对 称涡Re数效应的研究提供了重要的技术平台.     

静电陀螺仪MUM小角度读取的相关技术研究

讨论了同步解调法实现静电陀螺仪质量不平衡调制（MUM，Mass-Unbalanced Modulation）小角度读取的原理，分析了影响读取分辨率的各种因素，并对其实施方案中的相关技术进行了探讨。研究表明，尽管MUM读取方案非常适用于实心转子静电陀螺仪，但前提是将其小角度读取的分辨率提高到可与光电方法相比的水平（角秒级）。要实现这一目标，首先要保证转子和电极的机械特性达到一定要求；在此基础上，还要在支承系统的结构、转子位移测量电路设计等方面进行精心设计。     

Study of the aerodynamic characteristics of cone-sphere models in a hypersonic flow

The aerodynamic characteristics of cone-sphere models are studied at Mach numbers M = 6, 8.4, and 12 to 13 over a wide Reynolds number range. Models of a braking device (sphere) were connected with a load (frustum of a cone) by means of shrouds. The dependences of the aerodynamic coefficients C _x and C _y on the angle of attack α were obtained for different relative dimensions of the load and the braking device, shroud lengths, and Mach and Reynolds numbers. The effect of the above-mentioned parameters on the aerodynamic characteristics of the models is analyzed. The C _x (Re_D) dependences of load-parachutemodels in a symmetric flow are determined over the wide Mach and Reynolds number ranges 6 ≤ M ≤ 13 and 3 · 10³ ≤ Re_D ≤ 3 · 10⁶.     

投影散斑相关法测量精度影响因素的综合分析

本文用实验方法对影响投影散斑相关方法测量精度的几种因素进行分析和研究,从理论上分析和评价记录场角、投影视场角、离焦对测量结果精度的影响,以及这三种因素的综合影响,指出投影散斑相关方法具有较高的测量精度,能应用于位移的实际工程测量。     

THE CONSTRUCTION OF WAVELET-BASED TRUNCATED CONICAL SHELL ELEMENT USING B-SPLINE WAVELET ON THE INTERVAL

Based on B-spline wavelet on the interval (BSWI), two classes of truncated conicalshell elements were constructed to solve axisymmetric problems, i.e. BSWI thin truncated conicalshell element and BSWI moderately thick truncated conical shell element with independent slope-deformation interpolation. In the construction of wavelet-based element, instead of traditionalpolynomial interpolation, the scaling functions of BSWI were employed to form the shape functionsthrough the constructed elemental transformation matrix,and then construct BSWI element viathe variational principle. Unlike the process of direct wavelets adding in the wavelet Galerkinmethod, the elemental displacement field represented by the coefficients of wavelets expansionwas transformed into edges and internal modes via the constructed transformation matrix. BSWIelement combines the accuracy of B-spline function approximation and various wavelet-basedelements for structural analysis. Some static and dynamic numerical examples of conical shellswere studied to demonstrate the present element with higher efficiency and precision than thetraditional element.     

Reynolds数对大攻角细长旋成体绕流滚转角效应影响的数值研究

使用低耗散的Roe格式,数值模拟了Reynolds数(Re)对大攻角细长旋成体绕流滚转角效应的影响.模型头部加了几何小扰动块以引发流场的不对称.在较大的Re数(Re=10 5)下,本文的计算结果与实验是相符的,此时细长体的滚转会导致双稳态、双周期现象,即侧向力随滚转角呈现类似方波形式的双周期变化,方波中侧向力基本保持不变的状态对应于流场的正则态,且两个正则态的侧向力方向相反,方波中侧向力基本保持不变的状态对应于流场的正则态,且两个正则态的侧向力方向相反;而在较小的Re数(Re=4 000)下,如果扰动足够大,细长体的滚转将导致不同的双稳态现象,此时两个正则态的侧向力方向相同,而在较小扰动下双稳态现象不再出现;Re数更小时(Re=1 000),即使在较大的扰动下,双稳态现象也不再出现,侧向力随滚动角仍是连续变化的.本文的计算结果表明,Re数越小,流场对头部扰动的感受性越弱.     

Steering forces on undriven tractor wheel

The steering forces on an undriven, angled wheel mounting a 6-16 8PR tire were measured on a wheel test carriage at zero camber angle and at 1.5 km/h forward speed in a soil bin with sandy clay loam soil. The lateral force developed was found to be a function of slip angle, normal load, and inflation pressure for a particular soil condition. An exponential relationship could estimate the coefficient of lateral force of the 6-16 tire. The coefficients of this equation were found to be linearly related to inflation pressure. Rolling resistance of the wheel tested was found to be a function of slip angle, normal load, and inflation pressure for the soil condition tested. A linear relationship existed between the rolling resistance and slip angle, where the coefficients were found to be a function of inflation pressure and normal load. The generalized equations developed in the present study for estimating coefficients of lateral force and rolling resistance by taking both the tire and operating parameters into account, were found to be reasonably good by looking at the high coefficient of determination between experimental and estimated values.     

基于连续用电量和缴费时间差的客户信用动态评价模型

加大供电量和提高电费回收效率是供电商增加收益的主要途径,并且用电客户的缴费时间差直接影响着电费回收效率。在用电客户信息较少的情况下,仅仅依赖用电客户的用电量信息和缴费时间差信息,采用扩展的“S型”函数对用电量信息和缴费时间差信息进行整合建模,构建了一个能够度量客户持续用电能力和缴纳电费积极性的客户信用动态评价模型。应用构建的模型对赤峰市宁城县实际用电客户进行信用评价,评价结果与领域专家评价结果具有较高的一致性。     

Wettability and surface energy of parylene F deposited on PDMS

For the first time, the wettability and surface energy of parylene F were investigated. The results showed that parylene F had a hydrophobic surface with an eigen water contact angle of 104.7 ± 0.6°. We found that 3.5 μl probe liquid was an optimal value for the contact angle measurement of parylene F. Moreover, we found that the Lifshitz–van der Waals/acid–base approach was unsuitable for determining the surface energy of parylene F, whereas the Owens–Wendt–Kaelble approach and the limitless liquid–solid interface wetting system were compatible. The surface energy of parylene F was estimated to be 27.06 mJ/m² (Owens–Wendt–Kaelble) and 40.41 mJ/m² (Limitless liquid-solid interface wetting system). Furthermore, this investigation also provided a reference for the applications of empirical and physics-based semi-empirical approaches for the estimation of surface energy.